Installation. - TM-9-2815-224-34-P0281

TM 9-2815-224-34&P

Engine Brake Retarder Maintenance Instructions (Cont)

b. Installation.

NOTE

There are two models of engine brake wire harnesses. Model A has a wire extending

through the cylinder head and uses a butt connector to connect to the engine harness.

Model B has a spade (push-on) type connector. The following procedure covers both

models.

Engine brake wire harness is installed in left and right cylinder heads the same way.

Install bushing (1).

(1)

Install spacer (2) and harness (3) on two fuel tubes (4).

(2)

Install wire (5) on both engine brake

(3)

solenoids (6) with screw (7) and

lockwasher (8) for Model A. Connect

wire (5) on both engine brake solenoids

for Model B.

11-13

Change 2