Assembly. - TM-9-2815-224-34-P0277

TM 9-2815-224-34&P

Engine Brake Retarder Maintenance Instructions (Cont)

c. Assembly.

(1) Apply lubricating oil to master piston (1).

(2) Install master piston (1) and fork assembly (2) in bottom

of supply housing (3).

WARNING

Adhesives, solvents, and sealing compounds can burn

easily, can give off harmful vapors, and are harmful to

skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If

adhesive, solvent, or sealing compound gets on skin or

clothing, wash immediately with soap and water.

(3) Apply sealing and lubricating compound to screw (4)

and install lockplate assembly (5) and screw. Tighten

screw to 50 lb-in (5.5 Nm).

(4) Apply lubricating oil to slave piston (6) and slave

piston spring (7).

(5) Install slave piston (6) and slave piston spring (7) in

supply housing (3).

(6) Aline tab on spring retainer (8) with slot in supply

housing (3).

(7) Press spring (7) and spring retainer (8) into supply

housing (3), to just below retaining ring groove (10)

and install retaining ring (11).

11-9