 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Exhaust Manifold Maintenance Instructions (Cont)
c.
Installation.
NOTE
Instructions cover right hand exhaust manifold.
Installation of left hand manifold is the same.
(1) Install studs (1) if necessary.
(2) Tighten studs (1) to 25 to 40 lb-ft (34 to
54 Nm).
(3) Install. gaskets (2) with crimped side facing
..
cylinder head (3).
NOTE
Manifold retaining washers are special
curved washers. Convex side must be
mounted toward manifold.
(4) Install manifold (4) on studs (1).
(5) Install three washers (5) and nuts (6)
loosely.
(6) Install exhaust tube (7) with clamps (8).
(7) Install but do not tighten two crabs (9)
and nuts (10).
CAUTION
Be sure to tighten nuts from center nut
outward. Tightening outside nuts first can
crack exhaust manifold.
(8) Tighten nuts (6 and 10) in the following
order:
(a) Tighten nut (6) to 30 to 35 lb-ft (41 to
47 Nm).
(b) Tighten nut (10) to 30 to 35 lb-ft (41 to
47 Nm).
d. Follow-on Maintenance.
(1) Install engine side panels
(TM 9-2320-279-10).
(2) Close engine cover (TM 9-2320-279-10).
END OF TASK
9-3/(9-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals