Installation-continued - TM-9-2815-224-34-P0208

TM 9-2015-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-9. CAMSHAFT REMOVAL/REPAIR/INSTALLATION (CONT).

(6) Turn gear (5) to reach all rear end bearing screw

holes.

(7) Install six screws (8) and lockwashers (9) to both

camshaft rear end bearings (10) and engine

block (2).

(8) Tighten screws (8) to 40 lb-ft (54 Nm).

(9) Aline holes in three intermediate

bearings (11) on right and left camshafts (1

and 3) with tapped holes in engine

block (2).

(10) Install three lock screws (12).

(11) Tighten lock screws (12) to 20 lb-ft

(27 Nm).

(12) Apply clean engine oil to

left camshaft front end

bearing journal (13).

(13) Install gasket (14) and

bearing (15) on

camshaft (3).

(14) Install three screws (16) and

bearing (15) and engine

block (2).

(15) Tighten screws (16) to

40 lb-ft (54 Nm).

NOTE

Spacers have polished outside

(16) Install oil seal (18) and spacer (19).

7-30