Installation. - TM-9-2815-224-34-P0142

TM9-2815-224-34&P

Crankshaft Maintenance Instructions (Cent)

4-6. CRANKSHAFT COVER AND FRONT SEAL REMOVALI/INSTALLATION (CONT).

Support crankshaft cover (15) outer face on two

(12)

wooden blocks.

(13) Drive front seal (20) out front side of crankshaft

cover (15).

b. Installation.

NOTE

Do not remove lubricant or plastic coating on outer

surface of new front seal.

(1) Coat sealing lip of front seal ( 1 ) with grease.

(2) Position front seal (1) in crankshaft cover (2) with

sealing lip of front seal against inner face of ('crankshaft

cover.

(3) Drive front seal (1) into crankshaft cover (2).

Coat gasket (3) with grease and

(4)

install on engine block (4).

(5) Install crankshaft cover (2) on

dowels (5) and engine block (4)

while sliding oil seal (1) over

crankshaft (6).

4-30