Assembly. - TM-9-2815-224-34-P0131

TM9-2815-224-34&P

Crankshaft Maintenance Instructions (Cent)

d. Assembly.

NOTE

Do steps (1) to (4) only if the studs, dowels,

and plugs have been removed.

(1) Install two longer studs (1) in front bearing

cap (2).

(2) Install two shorter studs (3) in second

bearing cap (4).

(3) Install four dowel pins (5) in rear bearing

cap (6).

(4) Install four plugs (7) in

crankshaft (8).

e. Installation.

CAUTION

Do not handle bearing shells and thrust

washers more than necessary for

installation. Sweat from hands can damage

bearing shells and thrust washers.

NOTE

Bearing surfaces are numbered 1 to 5 from

front to rear of engine block. Repeat

steps (1) and (2) for four other bearing

surfaces.

(1) Aline tab (1) on upper bearing shell (2)

with slot (3) on engine block bearing

surface (4).

(2) Install shell (2). Make sure both ends of

shell are flush with bearing cap

mounting surfaces (5).

(3) Apply oil to bearing shells (2) after installation.

4-21