Installation. - TM-9-2815-224-34-P0078

TM 9-2815-224-34&P

Engine Block Maintenance Instructions (Cont)

3-5. AIR BOX COVERS REMOVAL/INSTALLATION (CONT).

(2) Remove three air box covers (2, 3, and 4), two gaskets (5), and gasket (6).

b. Installation.

WARNING

Adhesives, solvents, and sealing compounds

can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To

avoid injury or death, keep away from open

fire and use in well-ventilated area. If

adhesive, solvent, or sealing compound gets

on skin or clothing, wash immediately with

soap and water.

(1) Coat two gaskets (1) and gasket (2) with

adhesive-sealant and install on engine

block (3).

(2) Install three air box covers (4, 5, and 6) on

engine block (3) with seven screws (7).

Tighten screws to 96 to 144 lb-in (11 to

16 Nm).

c. Follow-on Maintenance. None.

END OF TASK

3-30