Follow-on Maintenance - TM-9-2815-224-34-P0073

TM 9-2815-224-34&P

Engine Block Maintenance Instructions (Cont)

Coat end plate gaskets (3 and 4) with

(3)

grease and install on engine block (5).

NOTE

Some engines have five screws and

lockwashers. Others have flanged head

screws and no lockwashers.

Install front end plate (1), five screws (6),

(4)

lockwashers (7), two screws (8) and

lockwashers (9). Tighten screws (6 and 8)

finger tight.

NOTE

Smaller right hand camshaft end bearing

will be used as a pilot when alining front

end plate on engine block.

Install two camshaft end bearings (10)

(5)

into the front end plate (1).

Tighten five screws (6) to 35 lb-ft

(6)

(47 Nm).

Tighten two screws (8) to 75 lb-ft

(7)

(102 Nm).

Remove end bearings (10).

(8)

c . Follow-on Maintenance. Install camshafts

END OF TASK

3-25

Change 2