Follow-on Maintenance. - TM-9-2815-224-34-P0070

9-2815-24-34&P

Engine Block Maintenance Instructions (Cont)

3-2. ENGINE BLOCK REPAIR (CONT).

(25) Remove eight cylinder

liners (5) from engine

block (3). Coat liners with

lubricating oil.

(26) Remove cylinder liner

inserts (4) from each

cylinder recess.

(27) Remove two seal rings (1)

from grooves (2) of each

cylinder of engine block (3).

WARNING

Compressed air used for

cleaning purposes will not

exceed 30 psi (207 kPa). Use

only with effective chip

guarding and personal

protective equipment

(goggles/shield, gloves, etc.).

(28) Dry engine block (3) with

compressed air.

(29) Coat engine block machined

surfaces with lubricating oil

to prevent rust.

e. Follow-on Maintenance.

(1) Install right side air box drains (para 3-6).

(2) Install crankshaft (para 4-5).

(3) Install right side air box covers (para 3-5).

(4) Install engine block breather pipe (para 8-2).

(5) Install rear end plate (para 3-4).

(6) Install front end plate (para 3-3).

(7) Install aftercooler (para 16-2).

(8) Install cylinder head (para 3-7).

(9) Install oil cooler (TM 9-2320-279-20).

(10) Install starter (TM 9-2320-279-34).

(11) Install flange elbow (TM 9-2320-279-20).

(12) Install engine circuit breaker bracket (TM 9-2320-279-34).

(13) Remove engine from stand (TM 9-2320-279-34).

END OF TASK

3-22