|
|
TM 9-2520-270-34
34. REPAIRER AND HELPER ATTACH
SLING (1) TO UPPER CONTAINER (2).
a. Using lifting device (3), lower
sling (1) to reach upper container (2).
b. Attach two legs (4) of sling (1) to
rear lifting points (5).
c. Attach two turnbuckle legs (6)
of sling (1) to front lifting points (7).
d . (H) Adjust length of two turnbuckle
legs (6), if necessary.
WARNING
Hanging loads could kill or
Injure you. Keep away from
hanging loads and overhead
equipment.
NOTE
The lower container has one pln to help aline
screw holes in the two container halves. The
upper container will go on only in one direction.
35. REPAIRER AND HELPER POSITION
UPPER CONTAINER (2) ON LOWER
CONTAINER (8).
a. Using lifting device (3), position
upper container (2) over lower
container (8).
b. (H) Aline pin (9) in lower
container (8) with hole in upper
container (2).
c. Using lifting device (3), place upper
container (2) onto lower container (8)
and aline 20 holes (10).
4-546
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |