 |
|||
|
|
|||
|
Page Title:
REPAIRER AND HELPER INSTALL OUTPUT HOUSING |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
Hanging loads could kill or
injure you. Keep away from
hanging loads and overhead
equipment.
31. REPAIRER AND HELPER INSTALL
O U T P U T HOUSING (1).
a.
Lift output housing (1).
b.
Slowly lower output housing
into place. Use four long screws (2)
for alinement, one in each corner.
Do not tighten screws (2).
(H) Use 3/8-inch drive hinged handle
c.
and 3/4-inch socket on output housing
installer (3). Rotate carrier (4) until
output housing (1) drops into place
over pins (5). Remove four screws (2).
d.
(H) Turn output housing installer (3)
one complete turn to be sure output
housing (1) is properly seated.
32. DETACH LIFTING DEVICE (6).
35. INSTALL LIFTING EYE (9).
a. Secure eye (9) with two new lock
33. REMOVE REMOVAL ASSEMBLY (7).
washers (10) and 4 3/4-inch screws (11).
a. Unscrew two screws (8).
36. USING 1/2-lNCH DRIVE TORQUE
b. Remove removal assembly (7).
WRENCH, TORQUE TWO SCREWS (11)
TO 40-45 ft-lb (6 mkg).
34. REMOVE INSTALLER (3).
GO TO NEXT PAGE
4-321
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals