 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
22. (DELETED)
23. INSTALL COVER (1) IF REMOVED.
a. Install new gasket (2) and cover (1).
b. Using 3/8-inch drive brace handle and
7/16-inch socket, install eight new lock
washers (3) and screws (4).
24. U S I N G 3/8-lNCH DRIVE TORQUE
W R E N C H AND 7/16-lNCH SOCKET,
TORQUE EIGHT SCREWS (4) TO
75-85 in-lb (86-98 cmkg).
WARNING
Fixture removal assembly must
be installed in position shown.
Output housing is heavy. Im-
proper installation of removal
assembly can cause an uneven
lift and injury to personnel.
26. INSTALL REMOVAL ASSEMBLY (7).
a. Remove two screws (8) and lock
25. INSTALL OUTPUT HOUSING
washers (9). Discard lock washers.
INSTALLER (5).
b. Put removal assembly (7) on output
a. Aline splines on installer (5) w i t h
carrier (10).
splines in carrier (6).
c. Tighten two screws (11).
b. Install installer (5).
GO TO NEXT PAGE
Change 1
4-319
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals