|
|
TM 9-2520-270-34
18. REPAIRER AND HELPER PLACE
TWO WOOD BLOCKS (1) (ITEM 2)
UNDER CARRIER ASSEMBLY (2) SO
THAT SPUR GEAR (3) IS NOT
TOUCHING.
19. INSTALL CONE AND ROLLERS (4).
20. (H) HOLD OUTPUT HOUSING (5)
DURING STEPS 21 THROUGH
40 TO PREVENT HOUSING
FROM TIPPING.
WARNING
Retaining ring is installed
under high tension. Use care
when removing and installing
retaining ring. Personnel can
be injured. Always wear
goggles.
CAUTION
Do not scratch shaft surface when installing
retaining ring. Equipment can be damaged.
4-298
Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |