 |
|||
|
|
|||
|
Page Title:
REPAIRER AND HELPER INSTALL OUTPUT HOUSING |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
VIEW TURNED FOR CLARITY
Hanging loads could kill or
injure you. Keep away from
hanging loads and overhead
equipment.
31. REPAIRER AND HELPER INSTALL
OUTPUT HOUSING (1).
a.
Lift output housing (1).
b.
Slowly lower output housing (1)
into place. Use four long screws (2)
for alinement, one in each corner. Do
not tighten screws (2).
c.
(H) Use 3/8-inch drive hinged handle
and 3/4-inch socket on output
installer (3). Rotate carrier (4) until
output housing (1) drops into place over
pins (5). Remove four screws (2).
d.
(H) Turn installer (3) one complete
turn to be sure output housing (1) is
properly seated.
35. INSTALL LIFTING EYE (9).
32. DETACH LIFTING DEVICE (6).
a. Secure eye (9) with two new lock
33. REMOVE REMOVAL ASSEMBLY (7).
washers (10) and 4 3/4-inch
screws (11).
a. Unscrew two screws (8).
b. Remove removal assembly (7).
36. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE TWO SCREWS (11)
34. REMOVE INSTALLER (3).
TO 40-45 ft-lb (6 mkg).
GO TO NEXT PAGE
Change 1
4-277
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals