 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
Remaining steps will install hardware that will
prevent completion of an inspection tree.
33. IF YOU ARE RETURNING TO AN
INSPECTION TREE, GO TO END OF
TASK. IF NOT, GO TO STEP 34.
CAUTION
Do not force spindle assembly into brake
assembly. Metal seal ring can be damaged.
34. INSTALL SPINDLE ASSEMBLY (1).
a. Coat ring (2) with petrolatum.
b. Center ring (2) on spindle
assembly (1).
c. Insert spindle assembly (1) into
brake (3).
d. Aline screw holes in spindle plate (4)
with screw holes in brake (3).
35. SECURE SPINDLE ASSEMBLY (1).
a. Install two spacers (5) in two holes
in spindle plate (4).
b. Install two washers (6) and screws (7)
and tighten evenly.
36. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE TWO SCREWS (7)
TO 10-12 ft-lb (1-2 mkg).
37. INSTALL LEFT-HAND OUTPUT
HOUSING. See task REPLACE LEFT-
HAND OUTPUT HOUSING, page 4-314.
END OF TASK
4-261
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals