 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
23. INSPECT RETAINING RING (3).
a. Inspect retaining ring (3) for damage.
See page 2-5.
b. If retaining ring (3) is damaged, go to
21. REPAIRER AND HELPER TURN
step 24. If not, go to step 25.
HOUSING (1) OVER.
24. USING RETAINING-RING PLIERS
22. REMOVE SPUR GEARSHAFT (2).
(ITEM 59), REMOVE AND DISCARD
RETAINING RING (3).
a. Using pry bar, pry out gearshaft (2).
NOTE
Ball bearings might not come out with spur
gearshaft. One bearing may stay in intermediate
h o u s i n g , the other bearing may stay in
single disk brake.
25. INSPECT TWO BALL BEARINGS (4).
a. Inspect bearings (4) on each
26. REMOVE DAMAGED BEARING(S) (4).
end of gearshaft (2) for damage.
See TM 9-214.
a. Using mechanical puller kit, remove
damaged bearing(s) (4). Discard
b. If either bearing (4) is damaged, go
bearings.
to step 26. If not, go to step 28.
GO TO NEXT PAGE
4-241
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals