 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
3. INSPECT GEAR (1) AND BALL
BEARING (2).
a. Inspect gear (1) for damage. See
b. If gear (1) is not damaged, go to step 4.
c. If gear (1) is damaged, replace gear
and bearing (2) and go to step 6.4.
4. INSPECT BEARING (2).
a. Inspect bearing (2) for damage. See
TM 9-214.
b. If bearing (2) is damaged, go to step 5.
c. If bearing (2) is not damaged, go to
step 6.4.
WARNING
Retaining ring is installed
under high tension. Use care
when removing and installing
retaining ring. Personnel can
b e injured. Always wear
goggles.
5. REMOVE BEARING (2).
a. Using retaining ring pliers (Item 59),
remove retaining ring (3) from gear (1).
b. Remove end plate (4) and bearing (2).
Discard end plate and bearing.
6. REMOVE BEARING INNER RACE (5)
FROM SPUR GEAR (1).
a. Using two pry bars, slowly pry off
bearing inner race (5). Discard bearing
inner race.
4-237
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals