 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
16. CHECK FOUR BRAKE PADS (1).
a. Using depth gage, measure height of
four brake pads (1).
b. If all brake
pads (1) measure
0.644 inch
(16.36 mm) or more, go to
step 19. If
any brake pad measures less
than 0.644
inch (16.36 mm), replace all
pads.
17. REMOVE RIGHT-HAND INTERMEDI-
15. INSPECT FOUR BRAKE PADS (1).
ATE HOUSING ASSEMBLY. See task
a. Inspect four brake pads (1) for
R E P L A C E RIGHT-HAND INTERMEDI-
damage. See page 2-5.
ATE HOUSING ASSEMBLY, page 4-170.
b. If no pads (1) are damaged, go to
step 16. If any pad is damaged, replace
18. REPAIR RIGHT-HAND INTERMEDI-
all pads. Go to step 17.
ATE HOUSING ASSEMBLY, page 4-183.
INSTALL
22. IF TWO RINGS (5) WERE REMOVED,
19. I N S T A L L R I G H T - H A N D I N T E R -
GO TO STEP 23. IF NOT, GO
MEDIATE HOUSING ASSEMBLY, IF
TO STEP 24.
REMOVED. See task REPLACE RIGHT-
H A N D INTERMEDIATE HOUSING
23. INSTALL NEW RINGS (5).
ASSEMBLY, page 4-170.
a.
Coat new rings (5) with petrolatum.
20. COAT OUSIDE OF BALL
Install new rings (5) in grooves (6).
b.
B E A R I N G (2) WITH TRANSMISSION
Hook new rings (5) by squeezing
c.
OIL.
together with fingers.
d.
Coat inside of bearing bore (7) with
21. PLACE DISK (3) ON SPUR
transmission oil.
GEAR (4).
4-200
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals