 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
Solvent fumes can burn and
could poison you. Read warn-
ing in the front of this
manual.
CAUTION
Gasket lube hole must be punched out or
equipment can be damaged.
6. INSTALL NEW GASKET (1).
a. Use a wiping rag dampened with
cleaning solvent to clean mounting
surface (2).
b . Apply petrolatum to mounting
surface (2).
c. Aline new gasket (1) with pins (3)
and gasket lube hole (4) with lube
hole (5).
d. Place new gasket (1) on mounting
surface (2).
NOTE
Early transmissions have lock washers and
grade 5 bolts. Later transmissions have flat
washers and grade 8 bolts. Transmissions must
be reassembled with same type washers and
bolts as removed. Old lock washers must
never be reused.
7. REPAIRER AND HELPER INSTALL
POWER TAKEOFF ASSEMBLY (6).
a. Aline two pins (3) on assembly (6)
with pilot holes (7). Install assembly.
b. (H) Hold assembly (6) in place.
c. Install 6 new lock washers or 6 flat
washers (8) and 6 screws (9) inside
of assembly (6). Install 11 new lock
washers or 11 flat washers (8) and
11 screws (9) outside of assembly.
8 . USING 1/2-INCH DRIVE TORQUE
WRENCH, TORQUE 17 SCREWS (9) TO
VIEW TURNED
FOR CLARITY
45-50 ft-lb (6-7 mkg).
4-142
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals