 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
Make sure at least one tab on key washer will
go into a slot on nut. Nut could come loose
during operation and damage equipment.
53. BEND ONE TAB (1) ON KEY
WASHER (2) INTO SLOT ON NUT (3).
CAUTION
54. INSTALL HUB (4).
Do not spread seals more than needed.
Seals are brittle and easily broken.
a. Aline screw and oil holes in new
gasket (5) and hub (4) with screw
and oil holes in housing assembly (6).
57. INSTALL TWO NEW SEALS (8)
Put gasket and hub in place.
IF REMOVED,
a. Coat two new seals (8) with
55. INSTALL SIX SCREWS (7).
transmission oil.
56. USING 1/2-INCH DRIVE TORQUE
b. Install seals (8) in grooves in
WRENCH, TORQUE SIX SCREWS (7)
hub (4).
TO 20-25 ft-lb (3 mkg).
c. Hook each seal (8) so that hooks (9)
a. (H) Hold housing assembly (6).
are closed.
4-136
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals