 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
If bevel gear or pinion is damaged, both gears
must be replaced as a matched set.
31. INSPECT BEVEL GEAR (1).
Inspect gear (1) for excessive wear
a.
or damage. See page 2-5.
If gear (1) is worn or damaged,
b.
and gear (2) or cone and rollers (3)
were not removed, do steps 23 and 24.
Go to step 32.
If gear (1) is worn or damaged, and
c.
gear (2) or cone and rollers (3)
were removed, go to step 32.
d.
If gear (1) is not worn or damaged,
go to step 35.
32. DISCARD BEVEL GEAR (1).
33. REMOVE SPIRAL BEVEL PINION (4)
WITH CONE AND ROLLERS (5)
FROM GEARSHAFT (6), IF NOT
34.1
IF HOUSING (7) WAS NOT
REMOVED.
REPLACED, INSPECT INSERTS. See
a. Using mechanical puller kit, remove
pinion (4) from gearshaft (6).
a. Repair inserts if damaged. See
task REPAIR INPUT BEVEL
34. REPLACE PINION (4) AND CONE
HOUSING INSERTS, page 4-138.
AND ROLLERS (5).
Change 2
4-132
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals