 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
Cone and rollers and spur gear may have been
19. REMOVE GEAR (1).
removed.
a. Using arbor press, remove gear (1).
22. INSPECT GEAR (1).
a. Inspect gear (1) for damage. See
20. DISCARD BEVEL GEAR SHAFT (2).
21. REPLACE PINION. See task REPLACE
b. If gear (1) is damaged, go to step 23.
INPUT BEVEL ASSEMBLY, page 4-94.
If not, go to step 26.
23. REMOVE CONE AND ROLLERS (3)
IF NOT REMOVED.
a. Insert drift punch through holes (4)
in gear shaft (2) and evenly tap
26. INSPECT OUTER ROLLER CUP (5)
off cone and rollers (3).
IN HOUSING ASSEMBLY (6).
b. Discard cone and rollers (3).
a.
Inspect cup (5) for damage. See
TM 9-214.
24. REMOVE GEAR (1) IF NOT REMOVED.
b.
If cup (5) is damaged or cone and
a. Using arbor press, remove gear (1).
rollers were discarded in step 8, cup
must also be discarded. Go to step 27.
25. DISCARD GEAR (1).
If cup is not damaged, go to step 28.
4-130
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals