 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
89 A L I N E PAINTED TOOTH (1) ON
INPUT BEVEL ASSEMBLY (2) WITH
TWO PAINTED TEETH (3) ON
PINION (4).
91. INSTALL THIRD RANGE CLUTCH
H O U S I N G (6).
Looking into bottom of transmission,
a.
rotate input shaft (5) until tooth (1)
a. Working on right side of transmission,
is between two teeth (3).
position and hold housing (6) on
gearshaft (7).
90. ROTATE TRANSMISSION SO TOP SIDE
b. Install two screws (8).
IS UP.
CAUTION
Do not use excessive force when tightening
clamp. Damage to equipment can occur.
93. ATTACH ANGLE BRACKET (10)
92. LOCK CLUTCH HOUSING (6) TO
A N D BACKLASH ACTUATOR (11).
T R A N S M I S S I O N HOUSING (9).
a. Fasten bracket (10) to housing (9)
Working on right side of transmission,
a.
using two Power Takeoff Assembly
lock clutch housing (6) to transmission
mounting screws (12).
housing (9). Use C-clamp.
b. Position actuator (11) on input
Tighten clamp only enough to prevent
b.
gearshaft (5).
clutch housing (6) from rotating.
GO TO NEXT PAGE
4-113
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals