INSTALL INPUT BEVEL ASSEMBLY - TM-9-2520-270-340416

TM 9-2520-270-34

NOTE

Input bevel repair kit contains shims of several

thicknesses for making bearing housing shim.

Nicks and burrs must be removed from shim(s)

before use.

65. R O T A T E TRANSMISSION SO BOTTOM

SIDE IS UP.

66. INSTALL INPUT BEVEL ASSEMBLY (1)

WITH NEW SHIM(S) (2) AS

DETERMINED IN STEP 63.

a. Slide shim(s) (2) onto assembly (1)

and aline screw holes and oil holes (3).

Shim(s) go on one way.

b. Coat assembly (1) with transmission

oil.

c. Push assembly (1) into housing (4)

until all holes are alined.

67. INSTALL EIGHT WASHERS (5) AND

SCREWS (6).

69. OBTAIN DIMENSION F.

a. Subtract 0.003 inch (.08 mm) from

68. U S I N G l/2-lNCH DRIVE TORQUE

dimension A.

WRENCH, TORQUE EIGHT SCREWS (6)

b. Record result as dimension F.

TO 25-30 ft-lb (3-4 mkg).

4-108