 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
9 . CHECK PISTON (2).
8. CHECK SPRING (1).
a. Using micrometer caliper set, measure
a. Using inside indicator caliper, measure
outside diameter of piston (2). If piston
free length of spring (1). If spring free
diameter is less than 1.059 inches
length is less than 3.98 inches
(26.90 mm), go to step 11. If not go to
(101 .09 mm), go to step 11. If not go to
step 10.
step 9.
ASSEMBLE
13. INSERT PISTON (2) AND SPRING (1) IN
COVER (3).
14. INSTALL BOLT (5),
a. Coat new preformed packing (6) with
10. CHECK COVER (3).
transmission oil and install on bolt (5).
a. Using micrometer caliper set and
b. (H) Hold cover (3) on workbench.
telescoping gage set, measure inside
c. Push in and turn bolt (5) until threads
diameter of bore (4). Do not measure
catch.
threads. If diameter is more than
d. Using adapter and 35-mm socket, install
1.064 inches (27.03 mm), go to step 11.
bolt (5).
If not go to step 13.
15. USING 1/2-INCH DRIVE TORQUE
11. REPLACE OIL FILTER COVER (3).
WRENCH WITH ADAPTER AND 35-MM
SOCKET, TORQUE BOLT (5) TO 45-50 ft-lb
12. EFFORT IS COMPLETE. GO TO END OF
(6-7 mkg).
TASK.
Change 3
4-76.4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals