 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
30. REMOVE CONTROLLER ASSEMBLY (1).
See task REPLACE CONTROLLER
ASSEMBLY, page 3-32.
31. REPLACE CONTROLLER ASSEMBLY (1).
33. INSTALL PRESSURE FLUID FILTER ( 2).
RECORD FAILURE ON DA FORM 2407
See task, REPLACE PRESSURE FLUID
AND RETURN CONTAMINATED
FILTER, page 3-42.
CONTROLLER TO DEPOT
34. EFFORT IS COMPLETE. GO TO END OF
32. EFFORT IS COMPLETE. GO TO
TASK.
END OF TASK.
ASSEMBLE
35. INSTALL CONTROLLER FLUID FILTER
36. INSTALL CAP (6) WITH ELEMENT
( 3) .
ELEMENT ( 3 ) IF REMOVED.
a. Push cap ( 6 ) with element ( 3.) into
a. Coat two new preformed packings ( 4 )
cavity in controller assembly ( 1 ).
and o-ring ( 5 ) with transmission oil.
b. Aline four screw holes (7) in cap ( 6 )
b. Install two new packings ( 4 ) on cap ( 6).
with screw holes ( 8 ) in controller
assembly ( 1 ).
c. Install new o-ring ( 5 ) in top of
element ( 3).
Using plastic-faced hammer, tap and
c.
seat cap ( 6 ) into place.
d. Install element ( 3 ) on cap ( 6).
GO TO NEXT PAGE
4-73
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals