 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
Filter element may come out with cover
assembly.
4 . REMOVE COVER ASSEMBLY (1).
a. Remove cover assembly (1). If oil
filter element (5) comes out with
3. LOOSEN COVER ASSEMBLY (1).
cover assembly, separate element
a. Remove 10 screws (2) and lock
from assembly.
washers (3). Discard lock washers.
b. Pry under two tabs (4) a little at a
5 . REMOVE AND DISCARD OIL
time until cover assembly (1) is loose.
FILTER GASKET (6).
8. CHECK FILTER CAVITY(7).
Using fluid gun, remove remaining oil
a.
from filter cavity ( 7 ).
Using measuring device, check
b.
cavity ( 7 ) for metal chips and note
c.
If element was damaged or more than 1/4
6 . INSPECT ELEMENT (5).
tsp (1 cc) of chips are found, go to
a. Pull element (5) straight up and out of
step 8.1. If not, go to step 15.
oil filter cavity (7).
b. Note if element (5) is
8.1 INSPECT OIL FILTER COVER ASSEMBLY,
damaged.
7 . DISCARD ELEMENT (5).
STEPS 9 THROUGH 14 DELETED.
4-88
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals