CLEAN MOUNTING SURFACES - TM-9-2520-270-340359

TM 9-2520-270-34

STEPS 29 THROUGH 31 DELETED.

CAUTION

Do not allow lip of seal to catch on shaft. Seal

WARNING

may leak causing damage to equipment.

Solvent fumes can burn and

could poison you. Read warn-

33. POSITION NEW GASKET (7) AND

ing In the front of this

COVER (2).

manual.

a. Apply petrolatum to gasket mounting

surface (5).

b. Aline new gasket (7) with pins (8),

32. CLEAN MOUNTING SURFACES (5)

and position on mounting surface (5).

AND (6).

c. Aline cover (2) with pins (8), and

a. Use wiping rag dampened with

position on mounting surface (5).

cleaning solvent.

34. SECURE COVER (1).

a. Place ring (2), flat side out, on

cover (1).

b. Aline ring (2) with bolt holes and

pins (3).

c. Install 12 new lock washers (4) and

bolts (5).

35. USING 3/8-lNCH DRIVE TORQUE

W R E N C H AND 7/16-lNCH SOCKET,

TORQUE 12 BOLTS (5) TO

75-85 in-lb (86-98 cmkg).

END OF TASK

4-59 (4-60 blank)

Change 3