 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
9. INSTALL PISTON (1) AND SPRING (2)
IN HOUSING (3).
a. Place housing (3) in vise.
8.
CHECK PISTON (1).
b. Coat piston (1) with transmission oil.
a. Using micrometer caliper set, measure
c. Install piston (1), short end first, in
diameter of short end of piston (1).
housing (3).
b. Replace piston (1) if measurement is
less than 0.3115 inch (7.91 mm).
d. Install spring (2) on piston (1).
10. INSTALL CAP (4).
a. Coat new preformed packing (5) with
transmission oil.
b. Install packing (5) on cap (4).
c. Install cap (4).
11. USING 1/2-DRIVE TORQUE WRENCH,
TORQUE CAP (4) TO 50-55 ft-lb
12. REMOVE VALVE (6) FROM VISE.
(7-8 mkg).
Change 2
3-30.2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals