INSTALL FRONT TRANSMISSION CONTAINER MOUNT

TM 9-2520-270-34

I N S T A L L FRONT TRANSMISSION

CONTAINER MOUNT (1) ON

TWO OUTPUT HOUSINGS (2),

a. (H) Aline four holes (3) in front

mount (1) with four holes in output

housings (2).

b. Install four lock washers (4),

washers (5), and screws (6).

USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE FOUR SCREWS (6)

TO 55-60 ft-lb (8mkg).

NOTE

The container has two alinement pins. They aline

holes in front and rear mounts with holes in

transmission container frame. Holes will aline

only in one position.

5. REPAIRER AND HELPER POSITION

T R A N S M I S S I O N (7) IN TRANSMISSION

LOWER CONTAINER (8).

Using lifting device (9), lower

transmission (7) onto transmission

container frame (10).

(H) Aline pin (11) in frame (10)

with hole in rear mount (12).

Aline pin (13) in frame (10) with

hole in front mount (1).

2-160