Install proper shims

TM 9-2520-249-34&P

4 Install proper shims (2) at the left side of the

bevel gear housing. Use headless guide bolts

2 Install proper shims (2) at the right side of the

(3) to hold the shims in place. Aline the shims

bevel gear housing. Use headless guide bolts

to index with the oil passages and the bolt holes.

(3) to hold the shims in place. Aline the shims

Install left bearing retainer assembly (1).

to index "with the oil passages and the bolt

NOTE

holes. Install right bearing retainer assembly

Refer to paragraph 8-6, above, for shimming

(1).

instructions.

NOTE

Refer to paragraph 8-7, above, for shimming

instructions.

3 Install eleven 3/8-16 x 1 1/4-inch, selflocking

bolts (1) Remove two headless guide bolts (2)

and install the remaining two bolts. Tighten the

bolts evenly to 36 to 43 pound feet torque.

5 Install eleven 3/8-16 x 1/4-inch, selflocking bolts

(1). Remove two headless guide

8-7