Remove retainer assembly

TM 9-2520-249-34& P

62 Remove retainer assembly (1) Remove reverse-

range clutch piston (2).

64 Using two of the bolts removed as jackscrews (1

and 4) loosen end cover assembly (2). Grasp

output driven gear (5) through the opening in the

gear. and then remove cover assembly, driven

gear, and gasket (3). Remove the driven gear

from the cover assembly.

Remove the

jackscrews.

63 On the left side, using a 9/16-inch wrench,

remove 21 bolts (1) two at bottom on inside of

flange) lockwashers and plain washers.

Remove lifting bracket (2).

65 Flatten lockwvasher ( 1) that retains (drive gear

bolt (2).

6-18