|
|
TM 9-2520-249-34& P
46 Remove pump gear key (3). Using a 1/2-inch
48 Using holder assembly (1), loosen, but do not
wrench, remove five bolts (4) and washers.
remove, bolt (2) that retains output drive gear
Using a 9/16-inch wrench, remove two bolts (1)
(3). Use a 1 1/8-inch socket wrench on bolt.
and washers. Remove pump assembly (2).
47 Using a chisel, flatten the tab on lockwasher (1).
49 Attach one leg of sling (1) to output housing (3).
Using a 9/16-inch wrench, remove 24 bolts (4),
lockwashers and plain washers. Using two of
the bolts removed as jackscrews in holes (1),
loosen the output housing at the splitline.
6-14
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |