Remove oil transfer plate

TM 9-2520-249-34& P

Remove bevel gear housing cover (1)and gasket

(2)

10.

Remove oil transfer plate (2) and gasket (3). Be

careful not to lose white nylon ball that may still be

in hole (1) on the top side. (See step 5, above.)

Using a 9/16-inch socket wrench, remove six short

13 Using a 9 / 16-inch wrench, remove three bolts (5)

bolts (2), four long bolts (1), two brake adjustment

and lockwashers. Remove oil filter screen element

covers (5) and two gaskets (6). Remove the

(4). Remove four bolts 13), lockwashers and plain

remaining 14 bolts (4), lockwashers and plain

washers. Remove oil filter screen housing (1) and

washers that retain bevel gear housing cover (3).

two gaskets (2 and 8). Support the housing while

removing the last two bolts. Remove several bolts

(6), lockwashers and plain washers from lockup

regulator valve body assembly (7).

6-4