Place peeled shim

TM 9-2520-238-34

REPAIR DIFFERENTIAL RIGHT ANGLE GEARBOX -- Continued

0028 00

NOTE

ST = X + Y - 5.002 inch

ST = Thickness of shim (3)

X = Etched true mounting distance on face of bevel gear (1)

Y = Measured distance after assembly of bevel gear (1) and adapter plate (2)

44. Place peeled shim (3) and output assembly (adapter plate (2) with attached parts) on gearbox housing (5). Secure with

four screws (4) spaced 90 degrees apart. Tighten screws to 14-16 lb-in (1.7 Nm) torque. Use torque wrench

0028 00-18