Install brake flange assembly

TM 9-2520-238-34

REPAIR DIFFERENTIAL STEERING CONTROL ASSEMBLY -- Continued

0026 00

11. Install brake flange assembly (1) on control flange assembly (2) with six gear shafts (3) inserted through bores in

differential flange (4). Secure flange (1) and flange (2) together with six machine bolts (5) and slotted nuts (6). Tighten

nuts to 65-70 lb-ft (88-95 Nm) torque. Use torque wrench (WP 0033 00, Item 43). Install six new cotter pins (7).

12. Install three external spur gears (8) on gear shafts (3). Use soft hammer. Secure with three washers (9) and slotted

nuts (10).

13. Tighten six slotted nuts (10) to 140-160 lb-ft (190-217 Nm) torque. Use torque wrench (WP 0033 00, Item 43). Install

six new cotter pins (11).

14. Install sleeve bearing (12) on brake flange assembly (1) with grooves pointing to the left.

0026 00-9