|
|
Code
Explanation
subsequent columns. When the unit of measure differs
H
General support maintenance
from the unit of issue, the lowest unit of issue that will
D
Depot maintenance
satisfy the required units of measure will be
(3) Recoverability code. Indicates whether
requisitioned.
e.
Quantity Incorporated in Unit, Column 5.
unserviceable items should be returned for recovery or
Indicates the quantity of the item used in the functional
salvage. Items not coded are nonrecoverable.
group. A "V" appearing in this column in lieu of a
Recoverability codes are-
quantity indicates that a definite quantity cannot be
Code
Explanation
indicated (e.g., shims, spacers, etc.).
R
Repair parts (assemblies and components),
f.
3-Day DS/GS Maintenance Authorization,
special tools and test equipment which are
Columns 6 and 7.
considered economically reparable at direct and
general support maintenance levels. When the
(1) The Repair Parts List include asterisk
item is no longer economically reparable, it is
entries in separate columns-one for Direct Support (DS)
normally disposed of at the GS level. When supply
and one for General Support (GS)-as appropriate to
considerations dictate, some of these repair parts
indicate the total range of repair parts authorized for use
may be listed for automatic return to supply for
at that category of required to be removed or
depot level repair as set forth in AR 710-50. When
disassembled during the performance of authorized
so listed. they will be replaced by supply on an
maintenance operations. They will be requisitioned
exchange basis.
initially on an "as required" basis. The repair parts
S
Repair parts, special tools and test equipment, and
authorized at the DS/ GS levels will be those authorized
assemblies which are economically reparable at
for the maintenance mission at these levels.
DS and GS activities and which normally are
Requirements for repair parts stockage and for
furnished by supply on an exchange basis. When
distribution to supported units will be based on demand
items are determined by a GSU to be
and determined in accordance with AR 711-16.
uneconomically reparable. they will be evacuated
(2) Special Tools or Test, Measurement and
to a depot for evaluation and analysis before final
Diagnostic Equipment (TMDE I and other support
disposition.
equipment peculiar to an item are listed with quantities in
T
High dollar value recoverable repair parts, special
the appropriate density spread / allowance columns.
g.
I-Year
Allowances
Per100
tools and test equipment which are subject to
special handling and are issued on an exchange
Equipments/Contingency Planning Purposes, Column 8.
basis. Such items will be repaired or overhauled at
This column indicated the requirement for contingency
(depot maintenance activities only. No repair may
planning purposes. An asterisk indicates authorization to
be accomplished at lower levels.
obtain or use as required."
U
Repair parts. special tools and test equipment
h.
Depot Maintenance Allowances per 100
specifically selected for salvage by reclamation
Equipments, Column 9.
This column indicates
units because of precious metal content, critical
authorization for depot use.
materials. High dollar value, or reusable casings
i.
Illustration, Column 10. This column is
or castings.
divided as follows:
b.
Federal Stock Number, Column 2. Indicates
(1) Figure Number, Column 10. Indicates
the Federal Stock Number assigned to the item and will
the figure number of the illustration in which the item is
be used for requisitioning purposes.
shown.
c.
Description, Column 3.
Indicates the
(2) Item Number, Column 10b. Indicates
Federal item name and a minimum description required
the callout number used to reference the item in the
to identify the item. The last line indicates the reference
illustration.
number followed by the applicable Federal Supply Code
4.
Special Information
for Manufacturer (FSCM in parentheses. The FSCM is
a.
Identifications of the usable on codes
used as an element in item identification to designate
indicated in Column 3 of this publication are-
manufacturer, distributor or Government agency, etc.,
Uncoded items are applicable to all Models.
and is identified in SB 708-42. Items that are included in
Code
Used on
Kits and Sets are listed below the name of the Kit or Set
A
Model CD-5s('(-3, only
with quantity of each item in the Kit or Set indicated in
B
Model CD.500-4, only
front of the item name.
b.
Repair Parts Mortality has been based on
d.
Unit of Measure (U/M), Column 4. Indicates
1000 hours per year.
the standard or basic quantity by which the listed item is
c.
The basis of issue for authorized special
used in performing the actual maintenance function.
tools and test equipment is the number of end) items of
This measure is expressed by a two-character
equipment supported and the number of maintenance
alphabetical abbreviation, e.g., ea, in., pr, etc, and is the
personnel allocated to perform the required
basic used to indicate quantities and allowances in
1-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |