Special Information. - TM-9-2350-311-24P-20013

TM 9-2350-311-24P-2

4. Explanation of Columns (Section IV) - (Continued)

b. PART NUMBER Index. Part numbers in this index are listed by part number in ascending alphanumeric

sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each

group in order A through Z, followed by numbers 0 through 9 and each following letter or digit in like order).

(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code

used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its engi-

neering drawings specifications standards, and inspection requirements to identify an item or range of items.

(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufac-

turer identified in the PART NUMBER and CAGEC columns to the left.

(4) FIG. Column. This column lists the number of the figure where the item is identified/located in Sec-

tions II and III.

(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

5. Special Information.

a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading.

Usable on codes are shown as "UOC: . . . " in the description column (justified left) on the first line applicable item

description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in

the RPSTL are:

Used On

Code

Model M109A3

G78

Model M109A4

AA5

G56

Model M109A2

Model M109A5

AH9

M15 Elevation Quadrant

L99

762

M42 Periscope

M117 Panormaic Telescope

U38

M117A2 Panormaic Telescope

L97

M118A2 Elbow Telescope

L95

M118A3 Elbow Telescope

V48

M145 Telescope Mount

L98

M145A1 Telescope Mount

V36

M146 Telescope Mount

L96

b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material

functional group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the

line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for item source codes to be

manufactured or fabricated are found in TM 9-2350-311 -20-2 and TM 9-2350-311-34-2.

c. ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be assembled from

component spare/repair parts are found in TM 9-2350-31120-2 and TM 9-2350-311 -34-2. Items that make up the

assembly are listed immediately following the assembly item entry or reference is made to an applicable figure.

d. KITS. Line item entries for repair parts kits appear at the end of the associated parts list.

e. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown

in the item number column. This index number is a cross-reference between the National Stock Number/Part Number

Index and the Bulk Material List in Section II.