Figure 4-13. Generator Set PU-304/MPQ-4A.

TM 746-10

Figure 4-13. Generator Set PU-304/MPQ-4A.

(5) Pack wire cable and cord assemblies as

d. Unitize each kit component as follows:

(1) Kits, small size. Place each kit, the

(6) Place mounting hardware, nuts, bolts, or

components of which have a total net weight of under 10

clamps within cloth bags and secure the drawstring.

pounds, within close-fitting, weather-resistant fiberboard

or paperboard boxes. Fill all void space within the box

(7) Individually wrap electron tubes or lamps

with cellulosic cushioning material to prevent

with cellulosic cushioning material and place within

movement. Close the box and seal all seams and joints

close-fitting, weather-resistant paperboard boxes.

(8) Process

electronic

and

electrical

(2) Kits, medium size. Place each kit, the

assemblies, parts, and associated items such as

components of which have a total net weight between

semiconductor devices, micro-miniature components,

10 and 70 pounds, within close-fitting, weather-resistant

resistors, receivers, or loudspeakers as follows:

fiberboard boxes. Fill all void space within the box with

(a) Wrap small items such as

cellulosic cushioning material to prevent movement.

semiconductor devices and resistors in corrugated

Close the box and seal all seams and joints with tape

paperboard and place in greaseproof, waterproof bags

and seal.

(3) Kits, large size. Overpack each kit, the

(b) Wrap large items such as receiving

components of which have a total net weight of not less

units and amplifiers with corrugated fiberboard and

than 70 pounds nor more than 200 pounds, within close-

cellulosic cushioning material and place within close-

fitting, weather-resistant, triple-wall

fitting, weather-resistant fiberboard boxes. Fill all void

space within the box with the same cushioning material.

Seal all seams and joints with tape.

4-50