Figure 4-1. Open Crate, Nailed or Bolted.

TM 746-10

Figure 4-1. Open Crate, Nailed or Bolted.

4-43. Graders

Position leaning wheels in a vertical position and lock in

place.

a. Start grader and operate through all gear ranges

to ensure distribution of lubricant or preservative over all

b. Coat unpainted metal surfaces with P-1, wrap

internal surfaces. Operate all hydraulic controls. Center

with greaseproof paper, and secure with tape.

the circle under the main grader frame and turn the

c. Clean, dry, and preserve hydraulic system,

moldboard so that the ends do not protrude outside of

power trains, brakes, suspension, steering, and all other

the tires and wheels. Raise moldboard and circle to

portions of the mobility aspect of the graders per

maximum height and lock in position.

Secure

applicable paragraphs of this chapter.

hydraulically controlled moldboard to prevent movement

by tying the circle to the grader frame with wire rope and

4-44. Cranes

cable clamps. Raise scarifier to its maximum height

a. Coat all bare surfaces on traversing gear and

and lock in position. Secure hydraulically controlled

rollers with P-1.

scarifiers with wire rope specified above.

b. Preserve front and rear outriggers with P-1.

4-10