 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-8145-203-13&P
(44) Stretch the rectangular seal (1) around the right
1
hand door (2). Make sure the large curved lip of the
seal is on the outside portion of the door.
2
1
(45) Pull the seal (1) away from the bottom edge of door
(2) allowing access to the inside edge of the seal.
NOTE
8 INCHES
Installation of the carriers must be complete
before polyurethane is allowed to dry.
(46) Starting from about eight inches above the inside
bottom edge of the door (2), apply a 1/8 inch bead
of polyurethane sealant (3) (Item 2, Appendix G)
along the middle of the seal (1) facing the edge of
2
the door. Continue the application to the other side
2
of the seal and up the edge for about another eight
1
inches.
(47) Install the seal (3) around the bottom edge of the
door (1).
3
1
54
1-10 Change 1 1
Change
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals