SECTION III. MAINTENANCE PROCEDURES - TM-55-4920-440-13-P0061

TM 55-4920-440-13&P

SECTION III. MAINTENANCE PROCEDURES

3-6. Insert Fasteners and Bolts - Inspect

3-6

This task covers: Inspection of all insert fasteners and bolts common to the Production/Quality Control Shop

INITIAL SETUP

Tools:

Torque wrench, 0-600 inch pounds range

Flashlight

Handle, socket wrench, 3/8" drive

Socket, socket wrench, 3/8" drive, 7/16", 1/2", 9/16"

Personnel Required:

67W Aircraft Quality Control Supervisor

67Z Aircraft Maintenance Senior Sargeant

Reference Information:

TM 55-1500-204-25/1

INSPECTION

NOTE

Go to step 2 if bolts are serviceable.

1. Inspect bolts.

a. Remove bolt (1) that will not tighten

to specific torque (see App F).

GO TO NEXT PAGE

3-2