Striking the shelter - TM-55-4920-440-13-P0059

TM 55-4920-440-13&P

WARNING

When all equipment and materiel is stored on the stationary side of the shelter, the limited

floor space presents a safety hazard to operating personnel. This is most critical during the

raising and lowering of the roof panel. Failure to observe supplemental instructions could

result in serious injury to personnel. Personnel inside the shelter could become trapped

between the roof panel and equipment bolted to the floor.

c. Two people inside the shelter, using the

support struts (1), will lower the roof panel (2) until two

personnel outside can reach and hold the weight of the

roof.

d. Inside personnel will shorten the struts (1) and

secure to roof brackets (3). They will then move into

position to assist outside personnel.

e. After all inside personnel are clear allow the roof

panel (2) to close to the vertical position.

f. After the shelter has been folded as 'detailed in steps a thru e and prepared in accordance with TM 10-5411-201-

14, the Production/Quality Control Shop is ready for transport or storage.

2-44

Change 1