Repositioning ECUs in support frames. - TM-55-4920-440-13-P0055

TM 55-4920-440-13&P

2. Remove four screws (3) from top bar (4).

Remove three screws (5) from bottom bar (6). Stow in

wall locker.

3. Repeat steps1 and 2 with other ECU.

g. Repositioning ECUs in support frames.

WARNING

Four people are needed when

moving or lifting the Environmental

Control Units ( ECUs).

Each unit

weighs approximately 270 pounds.

Trying to move or lift an ECU

without sufficient help can cause

serious injury to personnel.

Slide ECU (1) off end wall shelf (2).

2. Using lift handles (3) carry thru personnel

door (4) and Position in floor frame (5).

3. For shelter P/PN 136-0000-101) Slide

ECU (6) off side wall shelf (7). (For shelter P/N 5-4-

2828-1) Slide ECU (6) off end wallshelf (7A).

4. Using lift handles (3) carry thru cargo

door (8) and position in floor frame (5).

2-40 Change 1