Electric power. - TM-55-4920-440-13-P0035

TM 55-4920-440-13&P

a. Main power cable connection.

2-5. Electric power.

WARNING

1. Remove rolled up power cable (1) from

HIGH VOLTAGE exists in the

wall locker (2) in shop.

electrical system of the shop. All

electrical inspections, repairs or

replacement will be performed

with the power off and only by

qualified electricians.

Serious

shock hazards exist which could

result in injury or even death to

personnel.

CAUTION

Ensure that the power cable is not twisted, kinked or laid over sharp rocks or projections.

Where possible cable should not be routed through any deep ground depressions where

water may accumulate.

2. Unroll power cable (1) and extend it between shop (3) and power distribution panel (4).

Change 1 2-21