Positioning shop equipment.

TM 55-4920-440-13&P

i. Position bar (10) across bottom of other ECU

opening and install bolts (8).

2-3. Positioning shop equipment.

The following

procedures and recommended sequence for moving

equipment will be observed. The new positions in which

the equipment will be located on the expanded half of

the shelter are also identified.

WARNING

Four people are needed when

moving

lifting

the

Environmental

Control

Units

(ECUs).

Each unit weighs

approximately 270 pounds. Trying

to move or lift an ECU without

sufficient help can cause serious

injury to personnel.

a. Positioning ECUs for operation.

1. Loosen cargo straps (1) on both ECUs (2)

and (3), unhook from ring bolts (4) and remove.

Change 1

2-6