Chapter 1. INTRODUCTION - TM-55-4920-440-13-P0009

TM 56-4920-440-13&P

CHAPTER 1

INTRODUCTION

SECTION I. GENERAL INFORMATION

1-1. Scope.

Type of Manual: Operator and Intermediate Level

Equipment Name: Production/Quality Control Shop, NSN 4920-01-139-4545

Purpose of Equipment: To provide office space for supervisory personnel to schedule maintenance action, control

production time and provide quality control for the unit. This shop is utilized in conjunction with other maintenance shops

in the AVIM support unit.

1-2. Maintenance forms, records and reports.

Department of the Army forms and records used to maintain this equipment will be those prescribed by DA PAM 738-

751, The Army Maintenance Management System Aviation (TAMMS-A).

1-3. Reporting equipment improvement recommendations (EIRs).

"If your Production/Quality Control Shop needs improvement, let us know. Send us an EIR. You, the user, are the

only one who can tell us what you don't like about your equipment. Let us know why you don't like the design. Put it on

an SF 368 (Quality Deficiency Report). Mail it to: Commander, U.S. Army Aviation Systems Command, ATTN:

AMSAV-MMD, 4300 Goodfellow Blvd., St. Louis, MO 63120-1798. We will send you a reply."

1-4. Destruction of Army materiel to prevent enemy use.

Instructions for destruction of this equipment are contained in TM 750-244-1-4, Procedures for Destruction of

Aviation Ground Support Equipment (FSC 4920), to Prevent Enemy Use.

1-5. Preparation for storage or shipment.

For general technical information on preparation for storage and shipment refer to TM 55-1500-204-25/1 and TM

743-200-1. For regulatory requirements pertaining to equipment placed in administrative storage refer to AR 750-1.

Change 2 1-1