Positioning shop equipment for operation

TM 55-4920-437-13&P

h. Position bar (9) across top of other ECU opening

and install bolts (8).

i. Position bar (10) across bottom of other ECU

opening and install bolts (8).

2-3. Positioning shop equipment for operation. The following procedures and sequence for moving equipment will be

observed. The new positions in which the equipment shall be located on the expanded half of the shelter are also

identified.

WARNING

Four people are needed when moving or lifting the Environmental Control Units

(ECUs). Each unit weighs approximately 270 pounds. Trying to move or lift an

ECU without sufficient help can cause serious injury to personnel.

2-6 Change 1