TM 55-4920-433-13&P
3-19. Circuit Breaker (Hose cut-off machine)-Replace (Cont)
3-19
c. Replace inner panel (10) and install four
screws (11).
d. Replace panel cover/door assembly (12) and
engage locking levers (13).
e. Tighten four screws (14).
END OF TASK
NOTE
The following special brackets and components were fabricated for use in the Pneudraulic Shop.
Detailed drawings of the brackets/components are in Appendix E.
Bracket - Filler and Bleeder
Bracket - Cabinet, w/Drawers
Bracket - Storage Chest
Tool Box Rack
Support Frame, ECU
Security Bars, ECU
Book Rack
The TASK of INSPECTION, REPAIR and REPLACEMENT for all brackets and fabricated
components is typical. The book rack is used to show the required maintenance procedures. All
other brackets/components will be treated the same.
3-27