TM 55-4920-433-13&P
3-19. Circuit Breaker (Hose cut-off machine)-Replace
3-19
c. Loosen screws (3) on each of the three wires
on right side of circuit breaker (4).
d. Remove top green wire (5) middle black wire
(6) and bottom red wire (7).
e. Remove the three screws (8) (on left side of
circuit breaker) securing breaker to bus bar (9).
f. Grasp firmly and snap out defective circuit
breaker (4).
2. To install new circuit breaker.
a. Position new circuit breaker (4) and install
three screws (8) which secure the circuit breaker to
the bus bar (9).
b. On right side, insert red wire (7) on bottom,
black wire (6) in the middle and green wire (5) on top.
Tighten screws (3) securely.
GO TO NEXT PAGE
3-26